Function:Back tilt function; leg tilt function; back and leg linkage function; overall lifting function; front and rear tilt function; cardiopulmonary resuscitation function; the whole bed has a weighing function; emergency cardiopulmonary resuscitation and rescue electric CPR and manual CPR function; bed leaving alarm function; dynamic load-bearing weight of the bed: ≥240kg.
Technical parameter requirements:
1.Adjustment range
Back tilt 70º±5º ; Leg tilt 40º±5º ; Bed level lifting height
460-760mm; Front and rear tilt 0-14º±2º.
2.Three operating modes :
Hand controller, inner and outer side controller of
Bed board:
The bed board is made of 1.2mm thick cold-rolled steel plate molded in one step. It has a porous design, which is easy to breathe and has anti-slip
function. In addition to the molded design, the bed board has multiple
reinforcement bones and 2 reinforcement ribs on the four sides of the bed board. The whole bed has high load-bearing capacity and beautiful appearance..
Back bed board:
Adopt support unloading structure, reinforced thickened carbon steel pipe, evenly disperse pressure, enhance the safety performance of the back plate, and make the crank operation easier.
Motor:Well-known brand 4 sets of motor drive, multi-function hand controller, clear marking, simple and easy to understand operation, smooth lifting, no noise, thrust up to 4000-6000N.
Head and foot boards:
The electric-controlled bedside and footboards are made of polypropylene resin material and are blow-molded in one piece. They are designed in an arc-shaped European style, beautiful and generous, with color decorative stickers in the middle. The bedside and footboards can be plugged in and out without shaking, and the operation is simple. They can also be used for CPR first aid to meet clinical needs; there is a patient information card slot on the outside of the footboard.
ABS guardrail:
The four-piece guardrail is antibacterial and anti-ultraviolet. The height of the guardrail from the bed surface is ≥38 0mm. The guardrail has an electric control button to control the lifting and lowering functions of the bed. It can be positioned upright or horizontally. It is firm and reliable. The guardrail has a buffer when it is lifted and lowered, which extends the service life of the guardrail..
Angle display:
The 4 guardrails are equipped with angle indicators, which can accurately display the angles of various parts of the bed when the bed is raised or lowered, making it convenient for medical staff to adjust to the best tilt angle and provide patients with a comfortable lying posture..
Casters:
It uses central control luxury casters, one-foot brake, stable and reliable; the wheel surface is made of super polyurethane material, which is quiet, wear-resistant, anti-winding, and never rusts..
Battery:
Standard battery ensures that the posture function can be used in case of power failure.
Technology:
1.Robot welding is used, and the welds produced basically eliminate the pores in the welds, and the welding quality is stable (the service life of robot welding is more than three times longer than that of traditional manual welding).
2.The bed surface is painted with double coating technology. After degreasing, rust removal, and environmentally friendly silane film agent treatment, it is electrostatically sprayed. The surface electrostatic spray material has a perfect appearance and strong chemical corrosion resistance and electrical insulation. The spray color can be selected. The spray material is environmentally friendly, non-toxic, antibacterial, and mildew-proof (with an authoritative agency test report); the coating surface is smooth and bright, does not fall off, does not rust, is anti-static, and has high adhesion. The company has its own spray production line equipment.
NO.
|
Name
|
Unit
|
Quantity
|
Remark
|
| 1 |
Bed
|
set
|
1
|
|
| 2 |
Headboard, footboard (blow molding)
|
Pair
|
1
|
|
| 3 |
Center Control Casters
|
pc
|
4 |
|
| 4 |
Handheld Controller
|
pc
|
1 |
|
| 5 |
ABS Guardrail
|
pc
|
4 |
|
| 6 |
Angle display
|
pc
|
4 |
1 per guardrail
|
| 7 |
Motor
|
pc
|
4 |
|
| 8 |
Battery
|
pc
|
1 |
|
| 9 |
Drainage hook
|
pc
|
2 |
Optional
|
| 10 |
Mattress
|
pc
|
1 |
|
| 11 |
Wooden box packaging
|
pc
|
1 |
|
FAQ
Q: Are you manufacturer ?
A: Yes,Mingxu Medical is located in Qufu, Shandong Province, with a research and development center of more than 5,000 square meters and a standardized production workshop of more than 20,000 square meters,we have our own R&D team and sales team,We provide you one-stop service.
Q: Do you have CE,ISO13485?
A: Yes,our products are approved by CE,ISO13485
Q: Is OEM &ODM available in your factory ?
A: Yes, you just offer us necessary documents and then we will produce the products as your requirements.
Q: What is your Packing details?
A: 1.Wooden case or carton package,standard export packages
2.All of the productions are inspected carfully by QC before delivery.
Q: What is your Delivery time?
A: Usually, we make merchandise inventory, if we have the products in stock,The delivery time is5-10 days after receiving the deposit; If we don't have the products in stock, we will arrange the production right now, the delivery time will be 20-30days,It depends on the quantity of order
Q: What is your Min.order?
A: 1set
Audited Supplier 
){kind=link}